- constant voltage and current operation

- excellent load, line & Ripple Specifications

- each output has a readout for voltage and current (3 digit red LED display)

- coarse and fine voltage controls for accurate voltage and current settings
- indicators for constant voltage, constant current and overload operation

- constant voltage and current operation
- excellent load, line & Ripple Specifications
- each output has a readout for voltage and current (3 digit red LED play)
- coarse and fine voltage controls for accurate voltage and current settings
- indicators for constant voltage, constant current and overload operation

- constant voltage and current operation
- excellent load, line & Ripple Specifications
- each output has a readout for voltage and current (3 digit red LED display)
- coarse and fine voltage controls for accurate voltage and current settings
- indicators for constant voltage, constant current and overload operation

- constant voltage and current operation
- excellent load, line & Ripple Specifications
- each output has a readout for voltage and current (3 digit red LED display)
- coarse and fine voltage controls for accurate voltage and current settings
- indicators for constant voltage, constant current and overload operation

- All values may be entered from keyboard or rotary dial - RS-232/485
interface with cable, adapter and software
- Volts, amps and power are displayed on a backlight LCD display
- 10 settings may be stored in memory
- Light weight and energy efficient
- Over voltage and current protection
- Outstanding in Production Test Applications
- Constant Voltage setting
- Protection Current setting
- ON/OFF controlling the voltage output
- Maximum output voltage setting
- Maximum output power setting
- Communication setting
- Password setting

•Switch mode topology for cool, efficient operation
•GPIB and isolated analog programming standard on all models
•Built-in RS232 at no extra cost (-1200 Models only)
•LAN (LXI) control optional (-1.2K Models), replaces standard RS 232 interface
•1U panel height at 1200 watts
•Front to back air flow allows full power operation without spacers between supplies
•Seven models: * -1200 Suffix includes RS 232 interface, -1.2K includes LAN (LXI) interface:
KLP 10-150- *, KLP 20-120- *, KLP 36-60- *,
KLP 75-33- *, KLP 150-16- *, KLP 300-8- *, KLP 600-4- *
•Wide-range a-c input, 88-265V a-c with PFC

•Direct entry of voltage and current from the keypad with up-down slew buttons.
•A two-line, sixteen character back-lit display prompts you for settings and reports back what the ABC is delivering to the load.
•All full scale and zero adjustments are made with the keypad and are stored in non-volatile memory. Calibration is password protected.
•Kepco¹s ABC is controlled over either GPIB or RS 232  and understands SCPI and IEEE 488.2. VISA driver provided.
•ABC are automatic crossover voltage/current stabilizers with full control in both modes.
•Overvoltage and overcurrent protection are standard and fully programmable.
•The high efficiency switching topology used in ABC requires no forced air mechanical cooling.
•A highly effective multi-stage output filter keeps the output ripple and noise down to linear levels...without the heavy metal.
•A non-volatile memory stores 40 different combinations of voltage, current, overvoltage, overcurrent and time interval. They may be recalled individually or in a step sequence.
•External Trigger port allows either hard wire or software triggering to presets

•Source and sink 100% of their current rating. See Figure 1.
•Separate control circuits for voltage and current with automatic crossover to current and voltage limits.
•All controls and flag signals accessible through a 50-pin rear programming connector at the rear.
•Zeroable preamplifier available for scaling and summing external signals.
•Optional digital displays. Specify by substituting the suffix "D" in place of the "M."

The IT6100 series are single output programmable power supplies with 0.1mV, 0.01mA High resolution, and built in 5 ½ Digital Voltage Meter. With the high precision and high rise speed (20mS), they were designed to meet the needs of today’s high end applications in R&D design verification, university labs, production testing and other applications that require clean/reliable power and excellent performance

 
* constant voltage and current operation
* excellent load, line & ripple specifications
* large LCD display with back light
* readout for voltage and current
* overload protection circuit
* series or parallel connection
* extended output terminal
* automatic cooling fan operation
* 10-turn voltage control

* constant voltage and current operation
* excellent load, line & ripple specifications
* large LCD display with back light
* readout for voltage and current
* overload protection circuit
* extended output terminal
* automatic cooling fan operation
* 10-turn voltage control

* constant voltage and current operation
* excellent load, line & ripple specifications
* large LCD display with back light
* readout for voltage and current
* overload protection circuit
* series or parallel connection
* extended output terminal
* automatic cooling fan operation
* 10-turn voltage control

 
Affordable and Reliable Digital control power supply

The IT6700-series of digital control dc power supplies give you the performance of programmable power supplies without the high price. With the  Auto Range technology, it is offer you the flexible output voltage and current. With high power in a compact unit, the IT6700-series give you excellent performance while saving your space and cost at the same time.

 Compact, affordable programmable Power supply

The IT6800-series of programmable dc power supplies give you the performance of system power supplies without the high price. All models give you clean power, dependable regulation and programmable with GPIB, USB and RS-232 interface. IT6800-series are designed to meet the most demanding applications with high performance and reliability you can count on.

The Kepco Model BOP 500M and BOP 1000M are high voltage power sources, up to 500V or 1000V, respectively. These combine the capabilities of fast programmable power supplies with a Class A output stage, which can respond bidirectionally from zero. The BOP-HV can be operated in either a "voltage stabilizing" or "current stabilizing" operating mode (selectable by a front panel switch).

For lower voltage, higher current applications, Kepco's Series BOP is available in 100W, 200W and 400W sizes.

The term bipolar means that the voltage and current outputs can be made to vary smoothly and linearly through their entire plus and minus rated ranges, passing through zero with no polarity switching